Vietnam Section 301 Probe: What Hardware Buyers Should Do
Hephaestus Technology8 min read

Updated 20 November 2026. This explainer will be refreshed when USTR publishes its determination.
The US Section 301 probe into Vietnam investigates Vietnam's intellectual property protection and enforcement. Its deadline is no longer 29 November 2026: USTR extended the investigation by three months, and determinations are now due by 28 February 2027. According to EY, no tariffs or other measures have been proposed yet.
Vietnamese goods already pay a 12.5% US duty under a separate Section 301 forced-labour action. Companies building electronics in Vietnam for the US market should use the extra time to:
- document origin
- classify every BOM line
- rewrite price clauses before any new action is proposed.
Key takeaways
- The probe is about IP enforcement, and determinations are due by 28 February 2027.
- A 12.5% duty under the forced-labour Section 301 action has applied to Vietnamese goods since 24 July 2026. Any IP action could apply in addition, but no rate has been proposed.
- EU- and UK-bound builds are not subject to US duties, but can feel indirect effects.
- Act now: origin evidence, HTS codes per line, tariff clauses, a cost scenario and a second source.
What is the Vietnam Section 301 probe, and what happened to the 29 November deadline?
The Vietnam Section 301 probe is a USTR investigation into Vietnam's acts, policies and practices on intellectual property protection and enforcement. USTR named Vietnam a "priority foreign country" in the 2026 Special 301 Report on 30 April 2026. It initiated the investigation on 29 May 2026 under docket USTR-2026-0364, with the notice published on 3 June 2026.
According to Supply Chain Dive, the scope covers five areas, the same grounds set out in the Federal Register notice:
- online piracy
- counterfeit goods
- border enforcement
- unlicensed software use
- cable and satellite signal theft
Under the statute, USTR normally has six months from initiation to make its determinations, which pointed to 29 November 2026. The extension notice was published on 10 November and is effective as of 3 November 2026. It lengthens that period from six to nine months, with determinations due no later than 28 February 2027.
USTR's initiation notice also explains why it sees a problem. It cites a 50% fall in 2025, compared with 2024, in IP-infringing goods violations found by Vietnamese authorities. USTR presents that figure as evidence of weaker enforcement, not of less infringement. The notice also refers to Vietnam's 2022 amendments to its IP Law.
| Date | Step | Source |
|---|---|---|
| 30 Apr 2026 | Vietnam named a priority foreign country in the 2026 Special 301 Report | Federal Register |
| 29 May 2026 | Investigation initiated (docket USTR-2026-0364) | Federal Register |
| 24 Jul 2026 | Separate forced-labour Section 301 action takes effect: 12.5% on Vietnamese goods | EY |
| 3 Nov 2026 | Three-month extension takes effect | Federal Register PDF |
| 10 Nov 2026 | Extension notice published | Federal Register |
| 28 Feb 2027 | Deadline for determinations in the IP probe | EY |
Is the Vietnam Section 301 probe about transshipment?
No. Both the notice title and EY's summary describe the probe as an investigation of intellectual property protection and enforcement, and neither mentions transshipment. If you have read that this probe targets Chinese goods routed through Vietnam, that is not what the published notice says.
Country of origin still matters for any US-bound build, whatever this probe concludes. If your Vietnamese PCBA or box build relies heavily on imported components, be ready to show which manufacturing steps actually happen in Vietnam. Keep evidence such as process routings, test records and labour hours. That evidence protects you under any tariff regime, not just this one.
What US tariff do Vietnamese electronics pay today, and could the probe add to it?
Today the main Section 301 exposure is a 12.5% duty under the US forced-labour import prohibition action, effective 24 July 2026 according to EY. That action is separate from the IP probe.
EY notes that any new action from the IP probe could apply in addition to that duty. It also stresses that no tariffs or other measures have been proposed. If USTR finds Vietnam's practices actionable, EY expects that measures "would likely be proposed for public comment before taking effect," consistent with recent Section 301 actions. In practice, that means:
- No rate has been proposed.
- No product list has been published.
- On the pattern EY describes, there should be a comment window before anything bites.
Check your finished-good HTS codes against the published product coverage of the forced-labour action rather than relying on summaries.
Which products and bills of materials are most exposed?
This section is our reading, not a sourced finding. Exposure is highest for finished goods shipped to the US where the Vietnamese manufacturing step is thin. Typical examples are IoT devices, networking gear and consumer electronics. These products already carry the 12.5% duty, and they would carry any future IP-related measure if it applies broadly.
For software teams, note that "unlicensed software use" is one of the five grounds. That does not create a duty on software services, but it shows that US scrutiny of Vietnam goes beyond physical goods.
If you are still defining a product, origin exposure starts with the BOM decisions in our guide on how to build an IoT product.
Does the Vietnam probe affect EU- and UK-bound production, or only US imports?
Only US imports directly. Section 301 duties are US measures applied to goods entering the US, so a Vietnamese build shipped straight to EU or UK customers does not pay them. The probe matters to European firms when a product or sub-assembly ends up in a US-bound shipment.
Indirect effects are plausible, though we found no source quantifying them. Examples include capacity and pricing shifts at contract manufacturers that also serve US customers. EU and UK origin rules, including preferential origin under the EU–Vietnam trade agreement, were outside this research, so confirm them with your customs adviser.
Product compliance for Europe is unchanged by the probe: see our guide to CE marking for connected products.
What should hardware buyers ask their Vietnamese contract manufacturer now?
Ask for evidence, not reassurance. Run these six requests alongside a full electronics contract manufacturer audit:
- Origin and value-add evidence. Which process steps happen in Vietnam (SMT, test, firmware load, final assembly), backed by routing sheets and labour hours.
- HTS code per BOM line and for the finished good. Coverage of any current or future action turns on classification.
- Country of origin, line by line. Get a declaration per part, not a single blended percentage.
- Tariff-change clauses. Quote a base price, a pass-through formula and a cut-off date, so a new measure does not trigger a renegotiation from scratch.
- A cost scenario. Model landed cost at today's 12.5%, then at several higher assumptions. USTR has proposed no number, so treat these as stress tests, not forecasts.
- Dual-sourcing options. Which parts and assemblies could move, and at what tooling cost and lead time. Our DDR4 second-source analysis shows how to weigh redesign against buying ahead.
If you need an outside team to run this, Hephaestus Technology is headquartered in Ho Chi Minh City. It works with a sourcing and manufacturing network across China and South and Southeast Asia. Our engagement models range from fixed fee to monthly partnership.
Is Vietnam still a sensible China+1 option, or do India or China make more sense?
For many products, yes, but only if real manufacturing happens in Vietnam. This is a judgement call: we have not verified current tariff rates or cost data for India or other alternatives, and no location is immune to US trade action. Practical tests:
- Keep Vietnam when real value-add happens there and your documentation proves it.
- Stay in China when the US is a minor market, components are Chinese anyway and a Vietnam step would add little.
- Look at India or elsewhere when US volume is large and you can localise meaningful process steps, after checking current duties for that country.
Whichever you choose, avoid single-country dependence for your highest-volume US SKUs.
What to watch next
- 28 February 2027: deadline for determinations in the Vietnam IP probe.
- A proposed-action notice: if USTR finds the practices actionable, watch the Federal Register for proposed measures and a comment period. That is your window to model the impact and file comments.
- The forced-labour action: any change to the 12.5% rate or its product coverage.
- Other US measures on your components: ask your customs broker to confirm current duties on Chinese-origin parts in your BOM.
Frequently asked questions
Is the Vietnam Section 301 deadline still 29 November 2026?
No. USTR extended the investigation by three months, effective 3 November 2026. Determinations are now due by 28 February 2027.
Is the Vietnam Section 301 probe about transshipment?
No. The probe, initiated on 29 May 2026, covers intellectual property protection and enforcement. The published notice does not mention transshipment.
What US tariff do Vietnamese electronics pay today?
Vietnamese goods face a 12.5% duty under the US forced-labour Section 301 action, effective 24 July 2026. Check your HTS codes against the action's published product coverage.
Will the IP probe lead to new tariffs?
Nothing has been decided, and no tariffs or other measures have been proposed. EY notes any new action could apply in addition to the 12.5% duty. It expects measures would likely be proposed for public comment before taking effect.
Does the probe affect products sold in the EU or UK?
Not directly. Section 301 duties apply to goods entering the US, so Vietnamese builds shipped to EU or UK customers do not pay them. Indirect effects, such as shifts in contract manufacturer capacity or pricing, are possible.
To review a Vietnam build, BOM origin or a second-source plan, book a free 30-minute call with Hephaestus.
Cover photo by ThisIsEngineering on Pexels.