CE marking for connected products in 2026: what changed

Hephaestus Technology7 min read

CE marking for connected products changed in three ways in 2026: the Commission confirmed that the Radio Equipment Directive's cybersecurity rules will be repealed from 11 December 2027 and replaced by the Cyber Resilience Act, CRA vulnerability reporting became mandatory on 11 September 2026, and official CRA guidance arrived in July. Until December 2027, wireless devices still need to meet the RED cybersecurity requirements, which have applied since 1 August 2025. After that, the CRA becomes the cybersecurity basis for the CE marking on almost every connected product.

Key takeaways

  • Wireless connected products have needed RED cybersecurity compliance (EN 18031 series) for CE marking since 1 August 2025.
  • Delegated Regulation (EU) 2026/339 repeals those RED cybersecurity rules from 11 December 2027, when the CRA applies in full.
  • CRA reporting of actively exploited vulnerabilities has applied since 11 September 2026, including for products already on sale.
  • No CRA harmonised standards were available to cite yet; 41 standards are being developed under request M/606.
  • Ireland plans legislation by Q4 2027 for its CRA market surveillance and notifying authorities.

What actually changed this year?

Four developments, in date order:

Date Development Source
29 April 2026 Delegated Regulation (EU) 2026/339 published, repealing the RED cybersecurity delegated act from 11 December 2027 EUR-Lex
11 June 2026 CRA rules on notification of conformity assessment bodies (Chapter IV) start to apply CRA Article 71
27 July 2026 Commission publishes CRA implementation guidance with 67 practical examples European Commission
11 September 2026 CRA reporting duties apply; ENISA launches the Single Reporting Platform ENISA

Add one national development: on 7 October 2026 Ireland's new cyber security strategy committed to enacting legislation by Q4 2027 that provides for "a notifying authority and a market surveillance authority under the Cyber Resilience Act", along with a penalties regime (Matheson).

What does CE marking require for a connected device today?

For wireless products, it requires RED cybersecurity compliance on top of the usual radio, EMC and safety requirements. Delegated Regulation (EU) 2022/30 activated three essential requirements of the Radio Equipment Directive, Article 3(3)(d), (e) and (f):

  • (d) network protection, for radio equipment that can communicate over the internet;
  • (e) protection of personal data and privacy, for internet-connected equipment, childcare equipment, toys and wearables that process personal or traffic and location data;
  • (f) protection from fraud, for internet-connected equipment that lets users transfer money, monetary value or virtual currency.

The original start date of 1 August 2024 was postponed to 1 August 2025 to give standards bodies more time. Medical devices are excluded from all three, and vehicles and aviation equipment from (e) and (f).

The harmonised standards are EN 18031-1, -2 and -3, cited by Implementing Decision (EU) 2025/138 with restrictions. The most important: no presumption of conformity where the user is allowed not to set and use any password, where parental or guardian access control is not ensured for the relevant EN 18031-2 clauses, and for the secure-update criteria of EN 18031-3 (clause 6.3.2.4) for financial assets. If your product falls into a restriction, you lose the presumption of conformity for that part and should expect to involve a notified body.

Why is the RED cybersecurity regime being repealed?

To avoid two overlapping cybersecurity regimes. Delegated Regulation (EU) 2026/339, adopted on 16 February 2026, states that "Delegated Regulation (EU) 2022/30 is repealed with effect from 11 December 2027", the day the Cyber Resilience Act applies in full. From then, the CRA's Annex I requirements become the cybersecurity basis for the CE marking.

The repeal does not wipe the slate clean. Recital 5 says it does not affect market surveillance under the Radio Equipment Directive for equipment placed on the market between 1 August 2025 and 10 December 2027. Products you ship in that window must still comply with the RED rules that applied when you placed them on the market.

What does the CRA add to CE marking from December 2027?

It extends cybersecurity CE marking from wireless devices to almost all products with digital elements, wired devices and software included. The Commission's CRA page says products will carry the CE marking to show compliance, with some products of particular cybersecurity relevance needing third-party assessment.

The main differences from the RED regime:

RED cybersecurity (to 10 Dec 2027) Cyber Resilience Act (from 11 Dec 2027)
Products covered Certain radio equipment only Hardware and software products with digital elements
Requirements Network, privacy and fraud protection Annex I: secure by default, updates, access control, encryption, logging and more
Vulnerability handling Not an explicit lifecycle duty SBOM, disclosure policy, free security updates
Support period Not set At least five years unless expected use is shorter (Art. 13(8))
Incident reporting None 24-hour early warning, already applying since 11 Sept 2026
Standards EN 18031 series, cited with restrictions 41 standards in development under request M/606
Third-party assessment Where standards not fully applied Required for Class II and critical products, and Class I without harmonised standards

Are the CRA standards ready?

Not yet. The Commission's standardisation request M/606 covers a set of 41 standards, horizontal and product-specific, with priority for the important and critical product categories in Annexes III and IV. Until standards are cited in the Official Journal, there is no presumption of conformity from them. That matters most for Class I products such as routers, smart locks and cameras, which can only self-assess if they fully apply harmonised standards (Article 32). Manufacturers of those products should plan for the possibility of needing a notified body.

Who is affected, and what should they do now?

Anyone placing connected products on the EU market, in three groups:

  1. Wireless devices on sale now. Confirm your RED cybersecurity file is complete, check whether any EN 18031 restriction applies, and keep the documentation, because market surveillance can still check it after 2027.
  2. Products launching in 2027 or later. Design to the CRA now. A product launched in mid-2027 needs RED compliance at launch and, if it is substantially modified after 11 December 2027, CRA compliance too. Use our Cyber Resilience Act checklist to plan the technical file.
  3. Everything already on the market. CRA reporting applies to products placed on the market before December 2027 as well. If you have not set up a route to ENISA's platform, start with our guide to Cyber Resilience Act reporting.

Connected products also face data-sharing rules under the EU Data Act, covered in our guide to the Data Act for connected devices.

If you also sell in Great Britain, note that the UK's separate consumer connectable product security regime has applied since 29 April 2024, covering default passwords, vulnerability reporting and published update periods.

What is still uncertain?

The timing of CRA harmonised standards, the identity of Ireland's CRA market surveillance authority until legislation is passed, and how authorities will treat borderline products. The Commission's July 2026 guidance is non-binding but is the best current reference for scope questions.

Frequently asked questions

Do connected products need RED cybersecurity compliance for CE marking now?

Yes, for radio equipment within scope of Delegated Regulation (EU) 2022/30. Since 1 August 2025, internet-connected radio equipment, and certain toys, childcare products and wearables, must meet the network, privacy and fraud protection requirements to carry the CE marking.

When does the Cyber Resilience Act replace the RED cybersecurity rules?

On 11 December 2027. Delegated Regulation (EU) 2026/339 repeals the RED cybersecurity act from that date, when the CRA's requirements apply in full.

Will products sold before December 2027 need re-certifying under the CRA?

Not automatically. Products placed on the market before 11 December 2027 only need to meet the full CRA requirements if they are substantially modified afterwards. They are, however, covered by CRA reporting duties already.

Is EN 18031 enough to show RED compliance?

Often, but not always. The standards were cited with restrictions, for example where users can skip setting a password, so products in a restricted case get no presumption of conformity and may need a notified body.

Who will check CRA compliance in Ireland?

Ireland has not yet designated its CRA market surveillance authority. The national cyber security strategy published in October 2026 commits to legislation for that authority and a penalties regime by Q4 2027.

Building a connected product and want a second opinion on its security plan? Book a free 30-minute call with our team.

Cover photo by Pilan Filmes on Pexels.

Hephaestus Technology

We help founders and businesses validate, build and launch products across software, AI and hardware, from offices in Ho Chi Minh City, Dublin and Delaware. See how we work.

Tell us what
you're building.

A free 30-minute call. You'll get an honest view of the idea, the risks we see and what we'd do first, whether or not we end up working together.