Hardware prototyping in Ireland: labs, makerspaces, grants

Hephaestus Technology7 min read

Hardware prototyping in Ireland is supported by three layers of facilities: community makerspaces for early builds, Enterprise Ireland's Technology Gateways at technological universities for engineering help and test equipment, and national research centres such as Tyndall National Institute for advanced fabrication and semiconductors. Grants from Enterprise Ireland and Local Enterprise Offices can cover part of the cost of using them. The checklist below lists verified options and the order in which most founders use them.

Key takeaways

  • Start cheap: development kits and a makerspace are enough for most proofs of concept.
  • Enterprise Ireland's network of 17 Technology Gateways gives companies access to engineering expertise and equipment in technological universities.
  • Tyndall National Institute offers industry access to more than 70 laboratories, and Ireland's chips competence centre I-C3 opened to startups and SMEs in February 2026.
  • Innovation Vouchers (€10,000 standard, up to €20,000 co-funded) pay for work with registered knowledge providers.
  • Check facility access terms and grant rules directly before you plan around them, as both change.

Where can you build a hardware prototype in Ireland?

You can prototype in four kinds of places: your own bench, community makerspaces, Technology Gateways in technological universities, and national research institutes. The right one depends on stage. A first proof of concept rarely needs more than development boards, a soldering station and a 3D printer. Once you need RF testing, EMC pre-compliance or specialist fabrication, institutional labs become worthwhile.

If you are planning the whole journey from idea to production, our guide on how to build an IoT product shows where each type of facility fits.

Hardware prototyping in Ireland: the checklist

Work through the list in order. Each item explains what the option offers and when to use it.

1. Makerspaces and community labs

  • [ ] Tog Hackerspace, Dublin. Tog describes itself as "a hackerspace based in the centre of Dublin", a shared space where members work on their own projects. Useful for early builds, tools and peer advice. Check membership terms on its site.
  • [ ] Fab Lab Limerick. Started in 2012 as an elective course at the UL School of Architecture, it is now based at UL City Campus, Sarsfield Street, and its original equipment included 3D printers, CNC routers and laser cutters. Its listing gives opening hours of Wednesday to Saturday, 10am to 5:30pm, with a Thursday late opening.
  • [ ] Your own university or incubator. Many campuses run makerspaces for students and incubated companies. Ask your incubator what equipment you can book.

2. Enterprise Ireland Technology Gateways

  • [ ] Understand the network. The Technology Gateway Network has 17 specialist gateways in technological universities, supporting startups, SMEs and multinationals on new products, services and processes. Enterprise Ireland supports such as Innovation Vouchers can fund the work.
  • [ ] WiSAR Gateway (wireless sensors and IoT). The WiSAR Gateway provides access to Atlantic Technological University expertise in embedded systems and related software, RF and microwave communications, EMC test and EMI solutions, and lists anechoic chamber test facilities. Projects can run up to an advanced prototype at Technology Readiness Level 7.
  • [ ] Design+ Gateway (product design and prototyping). Based at South East Technological University, Carlow, Design+ lists product design, CAD, electronic prototyping, 3D printing and rapid prototyping. Its own description: "Prototyping is at the heart of what we do."
  • [ ] Other gateways. The network also covers areas such as manufacturing, materials and software. Use the network site to find the closest match to your technology.

3. National research institutes and semiconductor support

  • [ ] Tyndall National Institute. Tyndall, part of University College Cork, offers industry access to "more than 70 world-class fabrication, general characterisation, and research-specific laboratories" and reports over one hundred industry researchers working on site. Engagement ranges from co-funded, pre-competitive research to directly funded translational work. Best for advanced electronics, photonics, sensors and micro-fabrication rather than simple boards.
  • [ ] I-C3, Ireland's chips competence centre. Launched on 17 February 2026 and coordinated by Tyndall with MCCI, MIDAS Ireland, NovaUCD and University College Dublin, I-C3 gives startups and SMEs access to funding pathways, training, design tools and pilot line facilities, and connects them to European pilot lines. It is co-funded by the Department of Enterprise, Tourism and Employment through Enterprise Ireland and the EU Chips Joint Undertaking.
  • [ ] Shared-wafer chip prototyping. If you are developing a custom chip, Europractice runs multi-project wafer services that share wafer costs across several designs. Our FPGA vs microcontroller vs ASIC guide helps you decide whether custom silicon makes sense.

4. Funding supports for prototyping

5. Before you book a lab

  • [ ] Write a one-page brief: what you want to test or build, and what result you need.
  • [ ] Ask about IP terms before sharing designs, especially in research collaborations.
  • [ ] Confirm lead times for equipment, staff time and voucher approval.
  • [ ] Check whether the facility can provide a report you can use later in certification or funding applications.

How do you choose the right facility for your stage?

Match the facility to the question you need to answer.

Stage Question Typical facility
Proof of concept Does the idea work at all? Own bench, makerspace
Engineering prototype Does it work in a realistic form, with real radio and power? Technology Gateway
Pre-compliance Will it pass EMC and radio tests? Gateway or test lab with a chamber
Advanced technology Do we need custom sensors, photonics or chips? Tyndall, I-C3, Europractice

What are the limits of public facilities?

Public labs are excellent value but are not a contract manufacturer or an accredited certification lab. Expect to share equipment, to plan around academic calendars and to agree IP terms in writing. Formal CE testing for market launch is often done by an accredited test house, while gateways are best used for design help, testing during development and pre-compliance checks.

Frequently asked questions

Is there free hardware prototyping support in Ireland?

Not usually fully free, but grants can cover much of the cost. Enterprise Ireland Innovation Vouchers of €10,000 pay for work with registered knowledge providers, and LEO feasibility grants can cover 50% of prototype development costs in some areas. Community makerspaces set their own membership terms, so check each one.

What is a Technology Gateway?

A Technology Gateway is an Enterprise Ireland-supported centre within a technological university that gives companies access to applied research expertise and equipment. There are 17 in the network, each with a technical specialism, such as WiSAR for wireless sensors or Design+ for product design and prototyping.

Can startups use Tyndall National Institute?

Yes. Tyndall offers industry access to its laboratories through a range of models, from co-funded research to directly funded work. Through I-C3, launched in February 2026, startups and SMEs working with semiconductors can also access training, design tools and pilot line facilities.

Can I get EMC pre-compliance testing in Ireland?

Some Technology Gateways offer EMC-related testing; WiSAR, for example, lists EMC test and anechoic chamber facilities. Formal compliance testing for CE marking is usually done by an accredited test laboratory, so treat gateway testing as preparation.

Do I need a company to use these supports?

Enterprise Ireland and LEO grants are aimed at businesses and each has its own eligibility criteria. Makerspaces such as Fab Lab Limerick say anyone can join their community. Check each scheme's criteria before applying.

Planning a prototype and want help choosing the right route? Book a free 30-minute call with our Dublin team.

Cover photo by Vanessa Loring on Pexels.

Hephaestus Technology

We help founders and businesses validate, build and launch products across software, AI and hardware, from offices in Ho Chi Minh City, Dublin and Delaware. See how we work.

Tell us what
you're building.

A free 30-minute call. You'll get an honest view of the idea, the risks we see and what we'd do first, whether or not we end up working together.