EU Data Act for connected devices: what makers must share

Hephaestus Technology8 min read

The EU Data Act is a regulation that gives users of connected devices the right to access the data their device generates and to have it shared with third parties they choose. Manufacturers must tell buyers what data the product generates and how to get it, and products placed on the EU market after 12 September 2026 must be designed so that users can access that data easily, securely and free of charge. Micro and small enterprises are largely exempt from these device-data duties, but most other manufacturers of connected products sold in the EU are covered.

Key takeaways

  • The Data Act (Regulation (EU) 2023/2854) has applied since 12 September 2025; its access-by-design duty covers connected products placed on the market after 12 September 2026.
  • Users must be able to access product data and related service data, plus the metadata needed to interpret it, either directly or on request.
  • Data holders need a contract with the user to use non-personal product data, and may not use it to undermine the user's commercial position.
  • Products made or designed by micro and small enterprises are exempt from these Chapter II duties, with conditions.
  • In Ireland, the CCPC and ComReg are designated as competent authorities; the national Data Bill is still at General Scheme stage.

What is the EU Data Act?

The Data Act is an EU regulation that sets horizontal rules on who can access and use data generated in the EU, especially industrial and device data. It was published as Regulation (EU) 2023/2854 and, as the European Commission confirms, "is applicable from 12 September 2025". Because it is a regulation, it applies directly in every Member State, including Ireland.

It covers more than devices: it also includes rules on unfair contract terms, public-sector access in exceptional situations and switching between cloud providers. This article focuses on Chapter II, the part that affects manufacturers of connected products and providers of related services. For how it fits alongside GDPR, the AI Act and the Cyber Resilience Act, see our digital regulation map for EU startups.

Which products count as connected devices?

A connected product is defined in Article 2 as an item that obtains, generates or collects data about its use or environment and can communicate that data, for example over an electronic communications service, a physical connection or on-device access. A related service is a digital service, such as an app, that is connected to the product so that without it the product could not perform one of its functions.

Smart appliances, industrial machines, vehicles, wearables, connected tools and building sensors can all fall in scope. The Commission's FAQs (version 1.4, January 2026) add two useful clarifications: prototypes are out of scope because their manufacturing stage is not complete, and "placing on the market" refers to each individual product, not to a product type.

How do the EU Data Act connected devices rules work?

The rules work in three layers: transparency before sale, access by design, and access on request.

  1. Transparency before sale (Article 3(2) and 3(3)). Before a contract to buy, rent or lease a connected product, the seller must give the user clear information, including the type and volume of data the product can generate, whether it generates data continuously and in real time, and how the user can access it. Providers of related services must give similar information.
  2. Access by design (Article 3(1)). Connected products must be designed and manufactured, and related services designed and provided, so that product data and related service data, including the metadata needed to interpret them, are by default accessible to the user easily, securely, free of charge, in a comprehensive, structured, commonly used and machine-readable format, and directly accessible where relevant and technically feasible.
  3. Access on request (Articles 4 and 5). Where users cannot access data directly, the data holder must make readily available data accessible without undue delay, free of charge to the user, and where feasible continuously and in real time. At the user's request, the data holder must also share that data with a third party chosen by the user.

The FAQs explain that "directly accessible" does not require data to sit on the device: the storage location is irrelevant, as long as the user can access the data without the data holder's intervention, for example through an API.

What data must manufacturers share, and what is excluded?

The duty covers product data and related service data that are readily available to the data holder. Product data is data generated by the use of a connected product that the manufacturer designed to be retrievable. The FAQs describe the in-scope data as raw and pre-processed data, such as sensor readings of temperature, pressure or position, together with the metadata needed to understand them.

Excluded are what the FAQs call highly enriched data: inferred or derived data, or data resulting from additional investment such as proprietary, complex algorithms. Trade secrets are protected but not an automatic refusal ground. Under Article 4, the data holder and user must agree confidentiality measures, and the holder may refuse disclosure only in exceptional cases where it can show serious economic damage is highly likely, notifying the competent authority.

Which dates and exemptions apply?

The key dates come from Article 50 of the regulation.

Rule Applies from
Data Act generally, including Article 3(2) transparency and Articles 4 and 5 access on request 12 September 2025
Article 3(1) access-by-design obligation Connected products and related services placed on the market after 12 September 2026
Chapter IV unfair terms, for contracts concluded on or before 12 September 2025 (certain long-term contracts) 12 September 2027

Under Article 7, Chapter II does not apply to data generated by products manufactured or designed, or services provided, by a micro or small enterprise, unless that enterprise has a partner or linked enterprise that does not qualify, or is subcontracted to make the product. A transitional one-year relief also applies to newly medium-sized enterprises.

Data holders also need a contract with the user to use readily available non-personal data. The FAQs state this applies from 12 September 2025 to products placed on the market both before and after that date.

Who enforces the Data Act in Ireland?

Member States set penalties and appoint authorities. The Department of Enterprise, Tourism and Employment's General Scheme of the Data Bill 2025, published on 4 February 2026, designates the Competition and Consumer Protection Commission (CCPC) and ComReg as competent authorities, with the CCPC as Data Coordinator, and would give both powers to impose administrative financial sanctions. It is a draft scheme, not yet enacted law.

Changes are also proposed at EU level. The Commission's Digital Omnibus proposal, COM(2025) 837 of 19 November 2025 would, among other things, let data holders refuse to disclose trade secrets where there is a high risk of unlawful use in third countries with weaker protection. It remains a proposal; check its status before relying on it.

What should a hardware company do now?

Treat the Data Act as a design requirement, just like CE marking.

  • Confirm whether the small-enterprise exemption applies, including your partner and linked enterprises.
  • Map the data each product and app generates, separating raw and pre-processed data from derived insights.
  • Decide on direct access (on-device, app or API) or indirect access on request, and design the interface before hardware freeze.
  • Write the pre-contract information sheet and put it in your sales process.
  • Put user contracts in place covering your own use of non-personal data.
  • Align with your security work: the Cyber Resilience Act and radio cybersecurity rules apply to the same devices; our Cyber Resilience Act checklist for IoT and hardware makers covers that side.

If you are still at concept stage, building access in from the start is far cheaper, as our guide on how to build an IoT product explains.

Frequently asked questions

Does the Data Act apply to products already on sale before September 2026?

The Article 3(1) design obligation applies only to products placed on the market after 12 September 2026, and the Commission's FAQs say this is assessed per individual unit, not per model. Other duties, including the right to access data on request and the transparency obligations, have applied since 12 September 2025.

Do I have to put a data port on the device?

No. The FAQs say data can be directly accessible from the device or from a remote server under the manufacturer's control, as long as the user can access it without the data holder's intervention. Indirect access on request is also permitted where direct access is not relevant or technically feasible.

Can I charge users for access to their device data?

No. Access for the user must be free of charge. Where data is shared with a third party at the user's request, the regulation allows the data holder to agree compensation with that third party, under conditions set out in the Act.

Is my startup exempt from the Data Act?

Possibly, for Chapter II. Products made or designed by micro and small enterprises are exempt, unless the company has larger partner or linked enterprises or makes the product as a subcontractor. Check your status carefully, because growth or investment can change it.

Who do I contact in Ireland about the Data Act?

Under the government's General Scheme of the Data Bill 2025, the CCPC is designated as Data Coordinator and, with ComReg, as a competent authority. The legislation is not yet enacted, so take legal advice for specific questions.

Designing a connected product that needs to meet the Data Act? Book a free 30-minute call with our product team.

Cover photo by HUUM │sauna heaters on Pexels.

Hephaestus Technology

We help founders and businesses validate, build and launch products across software, AI and hardware, from offices in Ho Chi Minh City, Dublin and Delaware. See how we work.

Tell us what
you're building.

A free 30-minute call. You'll get an honest view of the idea, the risks we see and what we'd do first, whether or not we end up working together.